ProductsChairsLounge chairsSofasOffice chairsChaises longuesStools & benchesSculpturesConference chairsAirport seatingStorage spaceMicro architectureDining tablesCafé tablesCoffee & side tablesDesksOffice furniture systemsConference systemsLightingClocksDecorative objectsCoat racks & wall shelvesTrays & vesselsAlexander Girard Antonio CitterioCharles & Ray Eames Barber OsgerbyGeorge NelsonHella JongeriusIsamu NoguchiJasper MorrisonJean ProuvéKonstantin GrcicRonan & Erwan BouroullecVerner PantonPanter&TourronCare & repairCare productsManufacturer warrantyNewBestsellerGift finderOffice chair finderLounge chair finderColour & materialAnagram SofaVitra CushionsInspirationsLiving roomDining roomHome OfficeChildren's roomOutdoorHome StoriesAugmented RealityColours & materialsWorkspaceFocusMeetingWorkshopClub OfficeCitizen OfficeStudio OfficeDynamic SpacesHospitalityAirportsEducationCo-WorkingHealthcareOur ClientsA case for classicsOffice chairsDancing OfficeHome StoriesAugmented Reality - bring Vitra products into your homeA case for classicsColour & materialAn open house A leading space for a leading art collegeHigh comfort of low energyAn office landscape - without walls or partitionsServicesCare & repairCare productsManufacturer warrantyFAQ and contactInstructionsInstructions for earlier productsConsulting & Planning StudioConsulting & planning in the VitraHausOutdoor care instructionsRepair, maintenance, overhaul at the Vitra Circle Store Campus ProfessionalsCAD dataProduct factsheetsCertificatesBrochuresSustainability reportInstructionsEcology informationpConPlanning examplesColour & Material LibraryCertificates and standardsTo the dealer loginOur ClientsAnagram SofaMikadoTyde 2 on castorsACXDancing OfficeOffice chairsMagazineStoriesConversationsExhibitionsDesignerProject VitraJust Do It!EVER GREENWhy the Eames La Fonda Chair was designedWhen a Sofa is more than just a Sofa: Anagram100% virgin wool – 100% recyclableAn archive is like a time capsuleVitraHaus Loft - A conversation with Sabine MarcelisWalking the talkA 1000 m2 piece of furnitureFrom a toy to an objectA studio visit with Tsuyoshi TaneThe Eames Collection at the Vitra Design MuseumAbout the partnership between Eames and VitraVitra CampusExhibitionsGuided tours & workshopsFood and drinkShoppingActivities for familiesArchitectureYour eventPlan your visitVitra Campus appCampus EventsNewsVitraHausVitra Design MuseumVitra SchaudepotVitra Circle Store CampusOudolf GartenAbout VitraSustainabilityJobs & CareersDesign processThe Original is by VitraHistory - Project Vitra
Standard
When structure determines design
The French designer, architect and engineer Jean Prouvé created the Standard Chair in 1934. This design exemplifies a fundamental aspect of Prouvé’s numerous furniture designs and architectural works: his unwavering focus on structural requirements.
The load on the back legs of a chair, where it supports the weight of the sitter’s upper body, is greater than on the front legs. This is hardly a surprising discovery, but no other seating design demonstrates this principle as clearly as the Standard Chair: while tubular steel suffices for the front legs, which bear a relatively light load, the back legs are made of voluminous hollow sections that transfer the primary stress to the floor. The profile of the back legs, formed from thin bent sheet steel, resembles an aircraft wing, with the widest measurement at the point where the leg meets the seat frame – that is, where the stress is greatest. The tapered shape of the hollow section from the seat surface upwards simultaneously defines the angle and position of the backrest.
The load on the back legs of a chair, where it supports the weight of the sitter’s upper body, is greater than on the front legs. This is hardly a surprising discovery, but no other seating design demonstrates this principle as clearly as the Standard Chair: while tubular steel suffices for the front legs, which bear a relatively light load, the back legs are made of voluminous hollow sections that transfer the primary stress to the floor. The profile of the back legs, formed from thin bent sheet steel, resembles an aircraft wing, with the widest measurement at the point where the leg meets the seat frame – that is, where the stress is greatest. The tapered shape of the hollow section from the seat surface upwards simultaneously defines the angle and position of the backrest.
© Fonds Jean Prouvé at the Archives départementales de Meurthe-et-Moselle
© Centre Pompidou, Mnam, Bibliothèque Kandinsky, Fonds Jean Prouvé
The 1934 model was introduced as Chair No. 4, since it had been preceded by three prototypes; further versions continued to be developed under the name ‘Standard’. Up until the early 2000s, the work of Jean Prouvé was known outside of France to just a small circle of architects and collectors. Although re-editions of his furniture existed, his designs did not find the attention and distribution they deserve.
Why does a company like Vitra, who is committed to contemporary design, also produce furniture that was conceived long ago? The answer: because some designs from the past remain unsurpassed and have lost none of their vitality or relevance. Notable examples include the work of Charles and Ray Eames, Alvar Aalto, Ludwig Mies van der Rohe, Marcel Breuer – and likewise Jean Prouvé.
Why does a company like Vitra, who is committed to contemporary design, also produce furniture that was conceived long ago? The answer: because some designs from the past remain unsurpassed and have lost none of their vitality or relevance. Notable examples include the work of Charles and Ray Eames, Alvar Aalto, Ludwig Mies van der Rohe, Marcel Breuer – and likewise Jean Prouvé.
Metal & Wood
The Standard was manufactured in Jean Prouvé’s own factory. Most models had a metal frame and legs, with a seat and backrest made of wood. Other variations were made completely of metal or – especially during wartime and the related metal shortages – entirely of wood. Some had cushions in various materials, or demountable components for ease of transport; the last models with back legs made of aluminium followed in the 1950s.
Metal & Plastic
Standard SP (Siège en Plastique) builds a bridge from past to present, giving this iconic chair a contemporary look without altering its form: made of robust plastic, the seat surface and backrest of Standard SP come in a palette of finely modulated colours.
This product was designed by
Jean Prouvé
Jean Prouvé, who regarded himself as an engineer throughout his lifetime, was both the designer and manufacturer of his product ideas. His unique oeuvre, ranging from a letter opener to door and window fittings, from lighting and furniture to prefabricated houses and modular building systems, encompasses almost anything that is suited to industrial production and construction.
The Original is by Vitra
Invest in an original, for it will always retain its worth. An imitation will never be anything but a copy, a stolen idea. Appreciate the differences – not just the quality and more obvious variances but also the sensory and emotional appeal of the authentic product. An original is a lifelong companion and may well outlive you to be gratefully received by the next generation.
10 year manufacturer’s warranty for selected products
More details