ProductsChairsLounge chairsSofasOffice chairsChaises longuesStools & benchesSculpturesConference chairsAirport seatingStorage spaceMicro architectureDining tablesCafé tablesCoffee & side tablesDesksOffice furniture systemsConference systemsLightingClocksDecorative objectsCoat racks & wall shelvesTrays & vesselsAlexander Girard Antonio CitterioCharles & Ray Eames Barber OsgerbyGeorge NelsonHella JongeriusIsamu NoguchiJasper MorrisonJean ProuvéKonstantin GrcicRonan & Erwan BouroullecVerner PantonPanter&TourronCare & repairSpare partsCare productsManufacturer warrantyNewBestsellerQuickly availableGift finderOffice chair finderLounge chair finderColour & materialAnagram SofaVitra CushionsInspirationsLiving roomDining roomHome OfficeChildren's roomOutdoorHome StoriesAugmented RealityColours & materialsWorkspaceFocusMeetingWorkshopClub OfficeCitizen OfficeStudio OfficeDynamic SpacesHospitalityAirportsEducationCo-WorkingHealthcareOur ClientsA case for classicsOffice chairsDancing OfficeHome StoriesAugmented Reality - bring Vitra products into your homeA case for classicsColour & materialAn open house A leading space for a leading art collegeHigh comfort of low energyAn office landscape - without walls or partitionsServicesCare & repairSpare partsCare productsManufacturer warrantyFAQ and contactInstructionsInstructions for earlier productsConsulting & Planning StudioConsulting & planning in the VitraHausOutdoor care instructionsRepair, maintenance, overhaul at the Vitra Circle Store Campus ProfessionalsCAD dataProduct factsheetsCertificatesBrochuresSustainability reportInstructionsEcology informationpConPlanning examplesColour & Material LibraryCertificates and standardsTo the dealer loginOur ClientsAnagram SofaMikadoTyde 2 on castorsACXDancing OfficeOffice chairsMagazineStoriesConversationsExhibitionsDesignerProject VitraJust Do It!EVER GREENWhy the Eames La Fonda Chair was designedWhen a Sofa is more than just a Sofa: Anagram100% virgin wool – 100% recyclableAn archive is like a time capsuleVitraHaus Loft - A conversation with Sabine MarcelisWalking the talkA 1000 m2 piece of furnitureFrom a toy to an objectA studio visit with Tsuyoshi TaneThe Eames Collection at the Vitra Design MuseumAbout the partnership between Eames and VitraVitra CampusExhibitionsGuided tours & workshopsFood and drinkShoppingActivities for familiesArchitectureYour eventPlan your visitVitra Campus appCampus EventsNewsVitraHausVitra Design MuseumVitra SchaudepotVitra Circle Store CampusOudolf GartenAbout VitraSustainabilityJobs & CareersDesign processThe Original is by VitraHistory - Project Vitra
Development of a sustainable chair
An interview with Chief Design Officer Christian Grosen about Tip Ton RE
Producing long-lasting products has been Vitra’s primary contribution to sustainability since its beginnings. This holistic approach was actively expanded in the mid-1980s by reducing energy usage and investing in renewables at Vitra’s factories and offices. Raw materials have been assessed to exclude those that depend on hazardous or overly energy-intensive processes. Ninety percent of the aluminium used in Vitra products is recycled, and leather and cork are sourced from like-minded partners in Europe.
In regard to plastics, the company has relied on the logic that sourcing the best quality materials help to keep the objects it produces at the apex of the value chain. Making durable objects, tomorrow’s heirlooms, is far removed from the throwaway culture that generates plastic waste. Take-back and refurbishment services further extend the lifespan of products.
Plastic is a cornerstone material in Vitra’s history. The first product developed by the Swiss manufacturer in collaboration with a designer was the Panton Chair, which depends on the unique strength of a synthetic polymer for the sinuous cantilevered form that made it an iconic design of the 1960s.
Now, though, the company is issuing its first recycled plastic chair; a version of the Tip Ton model designed by Edward Barber and Jay Osgerby in 2011. Tip Ton is famous for incorporating in its moulded form something other manufacturers had only been able to offer via complex mechanisms: allowing users to change the seat angle for better task concentration.
The Tip Ton RE uses 3.6 kg of recycled polypropylene – which only months before might have been shampoo bottles or yogurt pots in the homes of German consumers before reaching Vitra’s injection moulding lines via the country’s ‘Yellow Bag’ recycling scheme.
To coincide with the chair’s launch, Chief Design Officer Christian Grosen shares some of the thinking behind Tip Ton RE.
In regard to plastics, the company has relied on the logic that sourcing the best quality materials help to keep the objects it produces at the apex of the value chain. Making durable objects, tomorrow’s heirlooms, is far removed from the throwaway culture that generates plastic waste. Take-back and refurbishment services further extend the lifespan of products.
Plastic is a cornerstone material in Vitra’s history. The first product developed by the Swiss manufacturer in collaboration with a designer was the Panton Chair, which depends on the unique strength of a synthetic polymer for the sinuous cantilevered form that made it an iconic design of the 1960s.
Now, though, the company is issuing its first recycled plastic chair; a version of the Tip Ton model designed by Edward Barber and Jay Osgerby in 2011. Tip Ton is famous for incorporating in its moulded form something other manufacturers had only been able to offer via complex mechanisms: allowing users to change the seat angle for better task concentration.
The Tip Ton RE uses 3.6 kg of recycled polypropylene – which only months before might have been shampoo bottles or yogurt pots in the homes of German consumers before reaching Vitra’s injection moulding lines via the country’s ‘Yellow Bag’ recycling scheme.
To coincide with the chair’s launch, Chief Design Officer Christian Grosen shares some of the thinking behind Tip Ton RE.
For Vitra’s first recycled plastic chair, was it a challenge re-engineering a design from the collection rather than starting with a new commission?
The reason for choosing Tip Ton was that it consists of a single material. Working on an existing product is a good way to gain experience with a new material. Though recycled polypropylene is still a type of plastic, it’s different to work with. When dealing with an existing product, you already know the technical challenges that might crop up, and you can anticipate those from the beginning. Due to the combination of an almost archetypical appearance and its new idea for movement, the Tip Ton chair encapsulates what Vitra is all about – innovation and longevity. This made it a good place to start.
What was different about working with a recycled material?
The challenge was to make the chair strong enough, which is often the issue when working with recycled materials. That’s why we added some fibreglass to strengthen the chair – while using as little as possible. Of course, when you combine fibreglass and polypropylene, it’s harder to achieve a perfectly uniform surface. That requires a lot of experience, which is why it was an advantage to know about the mould flows and technical aspects of the chair’s geometry. From the beginning, we decided that we didn’t want the material to result in any compromises on the quality of the chair. We wanted it to achieve the same certifications as the existing Tip Ton chair. It was an iterative process to determine the minimum amount of glass fibre while still meeting the desired quality standards.
How did you decide on the source of the polypropylene?
When you work with recycled plastic, you can choose between post-consumer or post-industrial material, even ocean plastic; and there are advantages and disadvantages with each. What we liked about the Yellow Bag system was that it was very easy to trace the journey. You take packaging waste from households; you clean it and chop it up. Then you turn it into something new that lasts. Local sourcing is also important; the material is collected in Germany and the chair is made in northern Italy. The great majority of our suppliers are located in Germany or neighbouring European countries. This is also where most of our products are sold. You see companies producing injection-moulded chairs in Asia with material collected in Europe, so the material has to be transported there and back, inevitably leaving an unnecessary ecological footprint.
The reason for choosing Tip Ton was that it consists of a single material. Working on an existing product is a good way to gain experience with a new material. Though recycled polypropylene is still a type of plastic, it’s different to work with. When dealing with an existing product, you already know the technical challenges that might crop up, and you can anticipate those from the beginning. Due to the combination of an almost archetypical appearance and its new idea for movement, the Tip Ton chair encapsulates what Vitra is all about – innovation and longevity. This made it a good place to start.
What was different about working with a recycled material?
The challenge was to make the chair strong enough, which is often the issue when working with recycled materials. That’s why we added some fibreglass to strengthen the chair – while using as little as possible. Of course, when you combine fibreglass and polypropylene, it’s harder to achieve a perfectly uniform surface. That requires a lot of experience, which is why it was an advantage to know about the mould flows and technical aspects of the chair’s geometry. From the beginning, we decided that we didn’t want the material to result in any compromises on the quality of the chair. We wanted it to achieve the same certifications as the existing Tip Ton chair. It was an iterative process to determine the minimum amount of glass fibre while still meeting the desired quality standards.
How did you decide on the source of the polypropylene?
When you work with recycled plastic, you can choose between post-consumer or post-industrial material, even ocean plastic; and there are advantages and disadvantages with each. What we liked about the Yellow Bag system was that it was very easy to trace the journey. You take packaging waste from households; you clean it and chop it up. Then you turn it into something new that lasts. Local sourcing is also important; the material is collected in Germany and the chair is made in northern Italy. The great majority of our suppliers are located in Germany or neighbouring European countries. This is also where most of our products are sold. You see companies producing injection-moulded chairs in Asia with material collected in Europe, so the material has to be transported there and back, inevitably leaving an unnecessary ecological footprint.
The original Tip Ton comes in eight colours, but the recycled version is only produced in pale grey.
Yes. It’s very hard to separate the colours of recycled waste, so if you want to have specific colours, you have to add pigments or bleach, and we didn’t want to do that. We wanted to keep the material as clean as possible, so what you see is what you get. There are tiny specks of other colours in the grey, which vary slightly from chair to chair. But for me that adds interest and pushes our perception of plastics. The slight variations in the recycled material add depth and give it a story, similar to how the structure of a piece of wood tells you about the tree’s growth cycles.
How did you test the chair for strength and durability?
All Vitra products go through rigorous testing, depending on the norms we want to achieve. BIFMA [the US Business and Institutional Furniture Manufacturers Association] testing and European standards such as EN or GS require thousands of usage cycles to achieve certification. There are machines that apply forces and drop tests with falling objects. We have invented some of our own tests, which are even more demanding. It was important that this chair achieve the same levels as the original version.
Making products for a circular economy places limitations on designers and manufacturers. How do you feel about those constraints?
It’s a huge challenge. You need a different mindset, but we are adapting to it, because it’s the way we need to think and act now. It’s part of the designer’s and company’s responsibility. In this dialogue we push each other towards a more circular way of thinking. Testing new materials and processes can give you unknown results; it always leads to some kind of learning and adds to the knowledge base on the circular economy. This is different from finding only a new aesthetic or a new function. We view this as a very relevant challenge. The rules are not yet written, and we are writing ours as we go.
What have you personally learned from the Tip Ton RE project?
On a visit to the material supplier, I saw a bag of the shredded food packaging. It was before it had been washed, and you could still smell the food. It made me really happy to think of this waste being turned into a beautiful object that could be used for many years. The journey from disposable materials to lasting products really makes sense to me. I had another insight when I heard an interview with a leading acoustic engineer. He said there are no good or bad acoustics, just ones that are right or wrong for a given purpose. That reminds me of how we should use plastic. It’s a fantastic material and will be with us for a long time, but there are right and wrong ways of using it. The critical thing is to understand when to use recycled plastic, when to use new material, and when to combine them to achieve products that people will keep and utilise for as long as possible.
Yes. It’s very hard to separate the colours of recycled waste, so if you want to have specific colours, you have to add pigments or bleach, and we didn’t want to do that. We wanted to keep the material as clean as possible, so what you see is what you get. There are tiny specks of other colours in the grey, which vary slightly from chair to chair. But for me that adds interest and pushes our perception of plastics. The slight variations in the recycled material add depth and give it a story, similar to how the structure of a piece of wood tells you about the tree’s growth cycles.
How did you test the chair for strength and durability?
All Vitra products go through rigorous testing, depending on the norms we want to achieve. BIFMA [the US Business and Institutional Furniture Manufacturers Association] testing and European standards such as EN or GS require thousands of usage cycles to achieve certification. There are machines that apply forces and drop tests with falling objects. We have invented some of our own tests, which are even more demanding. It was important that this chair achieve the same levels as the original version.
Making products for a circular economy places limitations on designers and manufacturers. How do you feel about those constraints?
It’s a huge challenge. You need a different mindset, but we are adapting to it, because it’s the way we need to think and act now. It’s part of the designer’s and company’s responsibility. In this dialogue we push each other towards a more circular way of thinking. Testing new materials and processes can give you unknown results; it always leads to some kind of learning and adds to the knowledge base on the circular economy. This is different from finding only a new aesthetic or a new function. We view this as a very relevant challenge. The rules are not yet written, and we are writing ours as we go.
What have you personally learned from the Tip Ton RE project?
On a visit to the material supplier, I saw a bag of the shredded food packaging. It was before it had been washed, and you could still smell the food. It made me really happy to think of this waste being turned into a beautiful object that could be used for many years. The journey from disposable materials to lasting products really makes sense to me. I had another insight when I heard an interview with a leading acoustic engineer. He said there are no good or bad acoustics, just ones that are right or wrong for a given purpose. That reminds me of how we should use plastic. It’s a fantastic material and will be with us for a long time, but there are right and wrong ways of using it. The critical thing is to understand when to use recycled plastic, when to use new material, and when to combine them to achieve products that people will keep and utilise for as long as possible.
Publication Date: 22.4.2021
Author: Louis Wustemann
Images: Lorenz Cugini, Studio AKFB, Dejan Jovanovic, Marc Eggimann