Panton Chair

If just one person believes in you

The history of the Panton Chair dates back to the latter half of the 1950s, when Danish designer Verner Panton developed the idea of a plastic cantilever chair. However, manufacturers did not want to pursue this daring concept. Willi Fehlbaum, the founder of Vitra, was interested in the idea but only agreed to it when Rolf Fehlbaum and the head of product development, Manfred Diebold, paid a visit to Panton and returned with glowing reports.
© Verner Panton Design AG
‘Rolf [Fehlbaum, son of the Vitra founding family] came to visit us one day and spotted a prototype of the Panton chair. It wasn‘t stable enough to sit on. Rolf asked: “Why isn‘t this chair being manufactured?” I answered, “Fifteen to twenty manufacturers have tried it but have all rejected the project for different reasons.” A well-known American designer – not Eames – even declared that something like that shouldn‘t be called a “chair” – claiming it was not suitable to sit on. Rolf was immediately on the phone to a Vitra technician, Manfred Diebold. […] Without Rolf there would have been no Panton Chair.’
Verner Panton
1963 marked the start of a collaboration between Vitra and Verner Panton with the development of one of the most iconic chair designs of the 20th century. It turned out to be a nearly impossible challenge, as the bold contours imagined by the designer had to be reconciled with the physical limits of plastics technology and manufacturing requirements. It involved several years of research, testing, discarded designs and continuous prototype development: the final shape of the chair was the culmination of ten prototypes made of manually laminated, glass-fibre reinforced polyester. Verner Panton and Vitra developers worked persistently and steadfastly on the project, sacrificing their evenings and weekends.


A small pilot series of just 150 pieces was manufactured in 1967 using cold-pressed, glass-fibre reinforced polyester. It was the first all-plastic chair to be made in one piece with a cantilever design. Its sculptural shape in Panton’s trademark vibrant colours caused quite a sensation. However, the costly and complex procedure made it impossible to keep up with the ensuing demand. After further tests with rigid polyurethane foam from Bayer proved successful, mass production commenced with an innovative moulding technique in 1968. This yielded larger quantities but still required time-consuming manual finishing.

Verner Panton and Vitra were not satisfied with the status quo and continued to search for better alternatives. They believed to have found a solution in a new thermoplastic material developed by BASF, as the injection moulding process considerably reduced the need for finishing work. However, technology at that time did not enable variations in material thickness, which led to several modifications to the design – the most noticeable being a series of ridges in the transition zone between the base and seat. The material subsequently proved to be far less resistant to ageing and weathering than was initially assumed, causing the chairs to break and threatening Vitra’s image. Production was therefore discontinued in 1979. It took years for Vitra to recover from the shock of this quality defect. However, interest in the Panton Chair lived on over the years and Vitra resumed production in 1990 – returning to rigid polyurethane foam with its complex finishing, but greater resistance to breakage.


Further advancements in plastics technology and new injection moulding options inspired Vitra and Panton to pick up the project again in the 1990s with a new material. Working closely together, they developed a new version made of polypropylene. Thirty years after the initial market launch, one of Panton’s key goals was finally reached: the plastic chair as an affordable industrial product. Verner Panton died shortly before the chair was presented in 1999.

Investing in innovation

Vitra places a high priority on investment in innovation. We constantly strive to push and expand the boundaries of design by linking its technical and conceptual know-how with the creative talents of leading designers. At the same time, the design classics in our portfolio are continuously updated in cooperation with the designers or their legal heirs to adapt them to the needs of today’s users.

In that spirit we manufacture Verner Panton’s design– which can be found in numerous museums and exhibitions – in two models: the Panton Chair Classic in rigid polyurethane foam with a glossy surface and the Panton Chair in polypropylene with a matt finish. Since 2007, the latter has also been available in a children’s version, Panton Junior, in keeping with the designer’s original plans.
This product was designed by

Verner Panton

Verner Panton was an influential figure in the development of design during the 1960s and ’70s. After moving to Switzerland in the early 1960s, the Danish designer became known for his inventive, novel ideas for furnishings, lighting and textiles. The masterful use of colour was a hallmark of his work.


The Original is by Vitra

Invest in an original, for it will always retain its worth. An imitation will never be anything but a copy, a stolen idea. Appreciate the differences – not just the quality and more obvious variances but also the sensory and emotional appeal of the authentic product. An original is a lifelong companion and may well outlive you to be gratefully received by the next generation.